Separate the three areas
The product’s declared cut is30×46cm. Usable fabric is the portion actually suitable for the intended project after considering edges and the received piece. Finished usable space can change again after the chosen treatment or finishing method. These are different quantities;the listing does not establish all three merely by supplying two dimensions.
Measure before the irreversible step
If the planned design is close to a boundary,inspect the actual count and flat dimensions before cutting,marking or stitching. Keep the product label with the piece. The site has not measured a received sample and does not promise an exact usable width or assume a standard tolerance. A review mentioning a different measurement is not substituted as our own test result.
A margin example
Suppose a nominal stitched design is18cm wide and the actual finishing plan needs4cm on each side. The planned width becomes26cm before any additional allowance required by that method. That arithmetic can guide a question about a30cm nominal cut,but it is not proof that the received piece has enough usable width or that4cm is appropriate for every finish.
Do not predict shrinkage
The selected source does not establish a measured shrinkage percentage for this received fabric. A tool should not subtract an invented5% or10% and call the result safe. If pre-treatment is required by the project,obtain current product and project guidance and assess the actual material rather than using a generic cotton rate.
Choose a cautious buying action
Where the project has a strict minimum dimension,ask for the seller’s current specification or choose a larger verified cut that suits the project’s actual requirements. This is a purchase-planning choice,not a fit or performance guarantee. Exact received usable dimensions,care and independent technical/content review remain pending.
Sources & scope
Checked November 5, 2026. Manufacturer and retailer references support the specific statements. Dated displayed prices are not final checkout quotes, performance rankings or performance testing. This shopping reference does not replace the exact product label or retailer instructions. Current received labels and independent technical/content/commerce review remain pending.
Hobbycraft DMC310 Mouliné8m5643781061 ↗
Hobbycraft DMC310 PearlSize5declared25m6404271008 ↗
Hobbycraft White14count30×46cm6705941000 ↗
Keep reading
How does14-count Aida affect a design’s nominal size? ↗
Does a higher fabric count make the same chart larger? ↗
Is a30×46cm fabric piece the same as fabric sold by the metre? ↗